Key Design Point:

- High-performance ADIS16470 Industrial IMU with high accelerometer dynamic range (±40 g), perfect for accurate motion sensing in demanding UAV applications
- All New advanced durabl vibration isolation material with resonance frequency in the higher spectrum, ideal for industrial and commercial drone applications
- Triple redundant IMU & double redundant barometer on separate buses
- High performance STM32H753 Processor
- Modular flight controller: separated IMU, FMU, and Base system
- Safety-driven design incorporates sensors from different manufacturers and model lineups
- Independent LDO powers every sensor set with independent power control.
- Ethernet interface for high-speed mission computer integration
- Temperature-controlled IMU board, allowing optimum working temperature of IMUs

All new Vibration Isolation Design

This new vibration isolation design uses a custom-formulated durabile silicone-based isolation material in place of the traditional foam design. Backed by extensive R&D and testing, it offers optimal IMU damping characteristics with resonance frequency in the higher spectrum, perfect for industrial and commercial drone

Note:
FC Module + a baseboard is required for this product to function. A FC Module or a Baseboard by itself will not function.

Specification:
Brand: Holybro

Model: Pixhawk 6X Pro

Item Name: Pixhawk 6X Pro Flight Controller 

Optional Version: Flight Controller ( Only FC ) / Combo Version ( FC + Standard Baseboard)

Processors & Sensors

FMU Processor: STM32H753
-32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
IO Processor: STM32F103
-32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
On-board sensors
- Accel/Gyro: ADIS16470
±40g, Vibration Isolated, Industrial IMU
- Accel/Gyro: IIM-42652
±16g, Vibration Isolated, Industrial IMU
- Accel/Gyro: ICM-45686 with BalancedGyro™ Technology
±32g, Hard Mounted
Barometer: ICP20100
Barometer: BMP388
Mag: BMM150

Electrical data

Voltage Ratings:
- Max input voltage: 6V
- USB Power Input: 4.75~5.25V
- Servo Rail Input: 0~36V
Current Ratings:
- Telem1 output current limiter: 1.5A
- All other port combined output current limiter: 1.5A

Mechanical data

Dimensions
- Flight Controller Module: 38.8 x 31.8 x 30.1mm
- Standard Baseboard: 52.4 x 102 x 16.7mm (Aluminum)
- Mini Baseboard: 43.4 x 72.8 x 14.2 mm
Weight
- Flight Controller Module: 50g
- Standard Baseboard: 72.5g (Aluminum)
- Mini Baseboard: 26.5g

Package Includes
Flight Controller Version:
1x Pixhawk 6X Pro Flight Controller Module
or
Combo Version Included:
1x Pixhawk 6X Pro Flight Controller Module
1x Pixhawk Standard Baseboard
1x PM02D HV Power Module
1x Cable Set